D-Ring Tool Shackles - Fall Protection

Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job.

The Squids 3790 Tool Shackle (2-Pack) installs onto the midsection of waisted/necked tools like spud wrenches, combination wrenches and hammers, to create a retrofit attachment point for tethering tools up to 15lb // 6.8kg, preventing dropped or falling objects from occurring on the job. Connection points for tool lanyards can be tricky to find, especially on smaller hand tools with small or no captive holes. While working at-heights, it is important to tether tools as part of your overall fall protection plan, but the lack of these connection points can make that difficult.</p>

STRAIGHTFORWARD INSTALLATION</h3>

To install, unscrew the crossbar and slide the U-shaped shackle around the neck or waist of the hand tool. Apply thread adhesive to the threads of the crossbar and reconnect, using a pair of pliers to firmly tighten the crossbar. Built with strong stainless steel, this tool shackle is durable and will not corrode in extreme environments.</p>

TESTED TO BE TRUSTED</h3>

These tool tether attachments are built to withstand defined weight limits and can easily be used by any worker to help avoid accidentally dropping objects that could cause damage, injuries or possibly death. These attachments are third-party certified to 15lb // 6.8kg maximum capacity and meet the ANSI/ISEA 121-2018 standard with all required labeling.</p>

Ideal for those tethering tools in construction, telecommunications, oil and gas, power generation, utilities, wind energy, manufacturing or other jobsites where dropped objects are a risk.</p>

Four sizes of tool shackles are compatible on tools with diameters ranging from 0.40in // 10mm to 0.80in // 20mm. Reference the size chart for specific ranges per size.</p>

Permanent roof tie-off anchor constructed from stainless steel and zinc-plated steel. Connecting D-ring fits a variety of connectors.

Guardian Ridge-It Permanent Roof Safety Anchor, D-Ring

D-Ring Tool Shackles - Fall Protection

High Tensile Steel Alloy Steel Ring, safety metal ring, flat delta ring, high tensile delta ring - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

3/8 Stainless Steel Screw Pin Anchor Shackle - 1 Ton

D-Ring Tool Shackles - Fall Protection

, Concrete D-ring anchor for 11/16 in., 18 mm or 3/4 in. hole with swiveling D-ring.

Concrete D-ring Anchor

2PCS D Ring Orange Shackles 3/4 Heavy Duty Shackle with 7/8 Pin - Max 9500 Lbs

LockJaw Flexible Synthetic Soft Shackle, Not for Lifting, 4.4 Tons WLL, 5 capacity at Tractor Supply Co.

Recovery Distribution Link Load Plate and Soft Shackles

B-Safe All Purpose Fall Arrest Harness with Chest D Ring

AUTMAXIN D Ring Shackles 3/4 Shackle (2 Pack) - 58,000Ibs Break Strength with 7/8 Anti-Loose Security Pin, Shackle Isolator Washer Kits for Tow Strap Winch Off-Road Vehicle Recovery, Silver : Automotive

DSJ-3001-1 Fall Protection Full Body Harness Stamped Bent D-Ring, Safety Belt D Rings - Dawson Group Ltd. - China Manufacturer, Supplier, Factory

D-Ring Tool Shackles - Fall Protection