wonsupona.com
Home
Search
Homebrass flare41FL-8 Dixon Valve Brass SAE 45 deg. Flare Fitting - Long Nut - 1/2 T — HoseWarehouse
41FL-8 Dixon Valve Brass SAE 45 deg. Flare Fitting - Long Nut - 1/2 T — HoseWarehouse

41FL-8 Dixon Valve Brass SAE 45 deg. Flare Fitting - Long Nut - 1/2 T — HoseWarehouse

4.7
(254)
Write Review
More
$ 5.00
Add to Cart
In stock
Description

41FL-8 Dixon Brass SAE 45 deg. Flare Fitting is a Long Nut, and has a 1/2" Tube Size x 3/4"-16 Straight Thread. The economical fitting resists mechanical pullout, and is manufactured especially for hard to hold liquids and gases.

Features:
  • Reference SAE 010111.
  • Long nut offers additional vibration capacity.
  • Economical fitting resists mechanical pullout.
  • Easy to disassemble and may be reassembled repeatedly, for a leak-proof connection.
  • Manufactured from CA 360, CA 345, or CA377 brass.
  • Manufactured especially for hard-to-hold liquids and gases.
Specifications:
  • Listed with Underwriter's Laboratories for flammable liquid, marine, refrigeration and gas applications. Meets functional requirements of SAE J512 and J513, ASA and MS (Military Standards).
  • Temperature range: -65 deg. F to 250 deg. F
  • Working Pressure Ranges: Temperature and type of tubing used are important factors, the table below is a good guide for proper selection. The PSI rating given is based on a temperature of 73 deg. F using copper tubing.
Assembly Instructions:
  • Cut tubing squarely and clean tube end thoroughly to remove burrs.
  • Place nut onto tube. Place threaded end of nut toward end of tube.
  • Flare tube end with flaring tool to provide 45 deg. flare.
  • Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal.

Working Pressure Ranges:

PSI Tube OD Tube Wall
1400 1/4 .030
1000 3/8 .032
750 1/2 .032
650 5/8 .035
550 3/4 .035
Part Number Tube Size Straight Thread Hex PSI Min/Max Temp Material Weight (Lbs)
41FL-4 1/4 7/16-20 9/16 1400 (95.24 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.0400
41FL-6 3/8 5/8-18 3/4 1000 (68.03 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.0800
41FL-8 1/2 3/4-16 7/8 750 (51.02 bar) -65 deg. F / 250 deg. F (-53.89 deg. C / 121.11 deg. C) Brass 0.1300

Dixon push-on fitting are intended for use with Lok-On (push-on style) hose only No hose clamps or ferrules are needed Lok-On fitting will properly

Dixon Valve BPN42 Brass Push-On Hose Fitting, 1/4 Male NPTF x 1/2 Push-On Hose ID Barbed

brass flare fittings, brass flare fittings manufacturers, brass flare fitting parts, brass flare fittings exporters, brass flare fittings manufacturer in india, brass flare fittings manufacturer in jamnagar

Parker's 45° flare fittings are economical for a metal-to-metal seal that are designed for high pressure service and have exceptional resistance to

Brass 45° Flare Fittings

LTWFITTING 1/2 in. Brass 45-Degree Flare Long Nuts (5-Pack) HF41L805 - The Home Depot

W-Series Wingstyle Female Threaded Coupler

LTWFITTING 3/8 in. Flare Brass 45° Flare Long Nuts (5-Pack

Dixon® ARG Industrial

249IFHD-5-2 - Male Elbow 249IFHD–249IF REF. SAE 040202

Male 37° Flare x Male NPTF Branch Tee

LTWFITTING 3/8 in. Flare Brass 45° Flare Long Nuts (5-Pack

2720806C (BPN43) Dixon Valve Brass 3/8 Male NPTF x 1/2 ID Push

SAE 45° Inverted Flare, Brass Fittings

Related products
You may also like