1/8 inch Quick Connect Male Brass Fitting —

This 1/8 inch quick connect male brass fitting is used on the ends of carpet wands and upholstery tools to connect them with carpet extractors.
This is a male quick connect brass fitting that is usually found on the ends of our carpet wands or upholstery tools. It is important to have a good connection, otherwise you can develop leaks or lose pressure. Replacing this male fitting as well as the female quick connect fitting is all you need to do in order to prevent or repair leakage. Just remember to use plumber's thread tape to seal the threaded connection to the hose, tool, or machine.

This 1/8 inch male quick disconnect is pictured above with its 1/4 inch counterpart. If you need the larger version, please go to the 1/4 inch male quick disconnect product page, and order it there.

For more parts that will fit your wands and upholstery tools, please take a look at our complete line of drag wand jets & parts.

*Please Note: This part previously had a part # of EDI-A00107.

Size: 5/16 Hose Barb to 1/8 NPT Male; Quantity: 4pcs; Material:CA 360 brass for barstock,high quality, provide high resistance to abrasion and

KOOTANS 4pcs 5/16 Hose Barb to 1/8 NPT Male Brass Quick Coupler Air M Type Fitting Quick-Connect Fitting

Dixon Air Chief Industrial Brass Male Threaded Plug 1/8 in. Male

Ralston QTFT-1MB1 1/8 Male NPT x Male Quick-Test Fitting, Brass

3/8 Female NPT Screw Thread to 3/8 inch Male Quick Connect Plug

Bediffer Quick Release Coupler Socket, 1/8 BSPP Quick Connector

0134 69 27 - Quick-Acting Barbed Fitting With Brass Male BSPT

WeldingCit® Quick Gas Connect Adapter Female 5/8-18 RH B-size to

This is a male quick connect brass fitting that is usually found on the ends of our carpet wands or upholstery tools. It is important to have a good

1/8 Quick Connect Male Brass Fitting

2 Pack 1/4 x 1/4 Push-In x Male NPTF Swivel Elbow Brass Quick