0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

This brass tube can be used in low load applications such as roller axles or as a spacer for a #10 screw. This tube is 1.54 inches long and has an outside diameter of 0.25 inches.

0.330 in. ID 0.470 in. OD 1.180 in. Long Nylon Spacer - AndyMark, Inc

Spacers help keep things in place in a multitude of ways. You can use this to slip over a shaft that is smaller than the inside diameter, between

0.140 in. ID 0.250 in. OD 0.156 in. Long Nylon Spacer

This is a plastic shoulder spacer. It is a spacer with a flange on one end. It is particularly usefull for turning a 1/2 in. round bearing into a 3/8

0.375 in. ID 0.500 in. OD 0.320 in. Long Nylon Shoulder Spacer

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

Home - Mechanical - Hardware - Spacers - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc

0.500 in. ID 0.625 in. OD 0.570 in. Long Nylon Shoulder Spacer - AndyMark, Inc

0.192 in. ID 0.250 in. OD 1.540 in. Long Brass Spacer - AndyMark, Inc

0.344 in. ID Brass Washer - AndyMark, Inc